3D BETON sells construction 3D printers made by the Ukrainian manufacturer CRAFTRUDER and prints all of its own products on them. It is a 2-in-1 system: in the workshop it prints concrete components, and on site it can print the walls of a house.
Request a quotation Configurations and prices ↓
A compact starting point for series production with two print heads.
| Output | 0.3 m³/h or 6 m²/h of wall* |
| Printing envelope X × Y × Z | 11 × 5 × 1.2 m |
| Power | up to 15 kW |
| Staff per shift | 3 people: operator, mixing operator, assistant |
| Suitable for | Blocks for houses, fences, planters and benches |
An automated production line with four print heads.
| Output | 0.6 m³/h or 12 m²/h of wall* |
| Printing envelope X × Y × Z | 23 × 5 × 1.2 m |
| Power | up to 20 kW |
| Staff per shift | 3 people: operator, mixing operator, assistant |
| Suitable for | Blocks for houses, fences, planters and benches |
Printing houses directly on the construction site.
| Output | from 0.3 m³/h or 6 m²/h of wall* |
| Printing envelope X × Y × Z | 11 × 8 × 3 m |
| Power | up to 20 kW |
| Staff per shift | 3 people: operator, mixing operator, assistant |
| Suitable for | Houses on the construction site |
* The equivalent wall area is calculated for a total printed layer thickness of 50 mm. Actual output depends on product geometry, layer parameters, mix design, pauses and shift organisation. Prices in US dollars according to the CRAFTRUDER price list of 02.10.2026.
Dual extrusion, conveyor concrete feed, heating and steam curing. A consistent mix, quality control and controlled curing: this is how fences, columns, planters and benches are printed.
A single extruder on a gantry and concrete supplied by pump. Suited to house walls, foundation elements and decorative surfaces right on site.
sealed, retractable
curing and heating
planetary mixing
on-site concrete supply
Actual output depends on layer parameters, product geometry, pauses, non-printing travel, mix design and shift organisation.
| Crushed stone 2–8 mm | 32.12% |
| Sand | 32.12% |
| Cement CEM II/A-LL 42.5 R | 21.42% |
| Water | 14.28% |
| Air-entraining plasticizer | 0.06% |
Surface texture: the printed layers are visible and tactile, so the wall needs no cladding.
013D printed fences, columns and caps in one style.
17 · View ↗
02Gazebos, garages, outbuildings, bar counters.
10 · View ↗
03Retaining walls, planters, raised beds, BBQ areas, benches and paving.
10 · View ↗
04Houses, duplexes, offices, facade panels and permanent formwork.
12 · View ↗
05Benches, bins, fountains, bus stops, shelters and art objects for municipalities.
18 · View ↗We'll work out the exact configuration and cost, including delivery and start-up, for your facility and products: leave a request in the form below or call us.
Specifications and prices according to the manufacturer CRAFTRUDER (price list of 02.10.2026).
Send a sketch, drawing or photo of your site. We'll pick the product, work out the price, agree on quantity and delivery, and our partners will handle installation.
Files, drawings and photos are easiest to send via Viber or e-mail.
